• Dual 10″ LF drivers
  • 3″ Neodymium HF compression driver
  • 138 dB Max SPL @ 1 meter
  • Birch plywood construction
  • Integral, side plate adjustable rigging system
  • Passive and Bi-amp mode switching
  • 2 x 10″ LF drivers
  • 3″ Neodymium HF compression driver
  • 138 dB Max SPL
  • 15mm / 18mm Birch plywood construction
  • Integral, side plate adjustable rigging system
  • 100° x 10° dispersion
  • 180 watts programme HF
  • 1600 watts programme LF
  • 16 Ω impedance

DUAL 10"

At the heart of the WLA-210X are 2 x 10″ custom Wharfedale Pro LF drivers.

These feature 4.0″ voice coils to ensure high efficiency and high power handling.

The HF Compression driver is also custom made by Wharfedale Pro. Using a neodymium magnet and a 3.0″ voice coil, this compression driver is coupled to a 100° x 10° waveguide.

These custom designed transducers are what give a WLA-210X system its incredible sound and power handling capacity.


Arrays can be assembled using only WLA-210X line array elements or with WLA-210XSUB Subwoofers at the top of the array.

The WLA-210X Common Fly frame supports up to 10 x WLA-210X elements and 1 x WLA-210XSUB OR 12 x WLA-210X with a safety factor of 12.



Imagine your dream system!  You can configure a WLA series rig to suit your needs!

To help your design and system preparations, you can download some recommended system diagrams.  These range from small to large and use a selection of our different amplifier ranges. 


WLA-210X rigging doubles up as an optimised ground stacking system, using the WLA-210XSUB subwoofer as a base.

Arrays of WLA-210X line array elements can be aimed downwards by as much as 10° to cover audience areas close to a stage, as well as upward by as much as 10° in order to better cover distant balcony seating areas. 


In BI-AMP mode, two power amplifiers can be used. This gives you the advantage of being able to select the best power amplifier specifications for each driver inside the loudspeaker. In a BI-AMP configuration, an external crossover is used to separate the frequencies and this splits the signal to the dedicated LF amplifier and the HF amplifier. This way, each amplifier is only working on the given frequency range and, in turn, is powering the corresponding driver inside the loudspeaker.

In PASSIVE mode, a single amplifier can be used to power all drivers inside the loudspeaker. The full frequency range is put into the loudspeaker and the loudspeakers’ internal crossover separates the frequencies, delivering the right frequencies to the right driver. In the example of a 2-way passive loudspeaker, this means that the single amplifier is powering both the HF compression driver and the LF transducer. The internal crossover takes care of both the frequency and power separation.


A Versadrive DSP (such as SC-48 FIR) or a DP-N series amplifier with internal FIR filtering is highly recommended to get the most from the system.  Phase, EQ and filtering should be applied and this way, the physics of the system can be truly optimised – delivering that sub-bass, power and clarity that this system can deliver.

Write a review

Note: HTML is not translated!
    Bad           Good

Wharfedale wla210x dual 10" passive line array

  • Brand: Wharfedale
  • Product Code: WLA210X
  • Availability: Contact for availability
  • R16,150.00

Write / Call Us
Share with your friends

A1 Sound
Sales Rep
Sales Rep
Sales Rep
Sales Rep
Sales Rep
Faizal Patel
Online & PA Sales Rep